Recycled PP Copolymer
PC-PI1
Supplier-described recycled polypropylene copolymer with no more than 10% unspecified filler, intended for injection molding after composition and color confirmation.
StatusCommercial
FormPellet
AppearanceTo confirm
ProcessInjection molding
Technical data
Measured properties
Reference values transcribed from the supplied PolyCompounder TDS documents.
Supplier TDS properties
| Property | Value | Unit | Method |
|---|---|---|---|
| Density | 0.95–1.00 | g/cm³ | Supplier TDS |
| Filler content | ≤10 | % | Supplier TDS |
| MFR (230°C / 2.16 kg) | 5–10 | g/10 min | Supplier TDS |
| Tensile strength at yield | ≥16 | MPa | Supplier TDS |
| Flexural modulus | ≥800 | MPa | Supplier TDS |
Technical note: Values are typical reference values and must not be construed as product specifications.
Applications
Where this grade works
General injection-molded parts
Product enquiry