High Density Polyethylene
SE52518
A high-density polyethylene with high stiffness, suitable for injection molding and extrusion coating.
StatusCommercial · Active
FormPellet
AppearanceNatural
ProcessInjection molding · Extrusion coating
Technical data
Measured properties
Reference values transcribed from the supplied PolyCompounder TDS documents.
Physical properties
| Property | Value | Unit | Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D792 |
| Melt flow rate (190°C / 2.16 kg) | 18 ± 1 | g/10 min | ASTM D1238 |
Mechanical properties
| Property | Value | Unit | Method |
|---|---|---|---|
| Tensile strength, yield (23°C / 50 mm/min) | 23 | MPa | ASTM D638 |
| Tensile elongation, yield | 9.0 | % | ASTM D638 |
| Izod impact strength (23°C, notched) | 5.0 | kJ/m² | ASTM D256 |
Technical note: Values are typical reference values and must not be construed as product specifications.
Applications
Where this grade works
Injection moldingExtrusion coating
Product enquiry